Early Access · Firmware Rev 5

Know what's happening on your BAS network.

BAS Probe gives BACnet and Modbus technicians real-time visibility into trunk health, device activity, and every point on the wire — browser-based, from a phone or tablet, with nothing to install.

Live Network Probe Network excellent · 96
MAC 12 · AHU-1Zone controller · Vendor A
Online · 2s
MAC 18 · VAV-23VAV controller · Vendor B
Online · 4s
MAC 9 · RTU-2Rooftop unit · Vendor C
Intermittent · 6 retries
MAC 31 · VAV-31VAV controller
Offline · 2m
MAC 5 · RouterMS/TP token ring
Online · token OK
Vendor-neutral by design — one dashboard for controllers from any manufacturer.

What it does today

A complete field diagnostic toolkit — not a simple status indicator.

Everything below is shipping in current firmware — verified against real commercial controllers in the field, not a roadmap promise.

●

Automatic device discovery

Finds and identifies every device on the trunk — vendor, model, firmware, and instance number — with one tap.

☰

Full point reads

Reads names, values, units, status, and access level across all standard BACnet object types, including Trend Logs.

⇄

Routed network traversal

Follows routers across multiple connected BACnet networks instead of stopping at the local trunk.

✎

Safe test writes

Priority-16, auto-releasing commandable writes for field testing — bounded so a forgotten override can't linger.

⚙

Modbus RTU support

Reads Modbus RTU devices on the same RS-485 connection, alongside BACnet MS/TP.

■

Equipment graphics

Live data bound to building > floor > equipment graphics — a customer-ready view, not a raw point list.

✓

Network health scoring

CRC errors, sync losses, token activity, and bus traffic rolled into one at-a-glance health score.

↓

CSV export & local dashboard

Join the probe's Wi-Fi from any phone, tablet, or laptop — no app to install, no cloud account required.

See it in action

A two-minute walkthrough of the dashboard

Scanning a trunk, reading points, and building an equipment graphic — recorded directly from the probe's own web interface.

Dashboard · Scan · Building view · Watchlist Concept demo · simulated data

Technical documentation

Specs and the full reference manual

Everything a technician or an evaluator needs to understand the hardware, the protocol implementation, and day-to-day use.

PDF

Product Cutsheet

One-page overview: features, specifications, and typical field workflow.

1 page · PDF
Download cutsheet →
PDF

User Guide & Reference Manual

Full setup, dashboard tour, scanning, building view, point access, network health, and troubleshooting reference.

36 pages · PDF
Download user guide →

Roadmap

Now, next, and future

BAS Probe already covers discovery, full point access, and safe writes. Here's what's shipped and what we're building toward.

Now · shipping

A complete field diagnostic tool

  • Real-time BACnet MS/TP & Modbus RTU traffic, device activity, and health scoring
  • Automatic multi-vendor device discovery and full point reads
  • Routed-network traversal across multiple connected BACnet networks
  • Equipment graphics with live data binding for a customer-ready view
  • Safety-bounded write-back for field testing

Future · vision

One dashboard, every vendor

  • Automatic service reports contractors can hand building owners
  • Cloud / remote monitoring across multiple buildings without a laptop on site
  • A single vendor-neutral dashboard replacing per-manufacturer proprietary tools

The throughline: every near-term feature is a building block toward one vendor-neutral dashboard that lets a building owner safely monitor and test equipment from any manufacturer, in one place.

Ready for early access?

We're inviting a small group of BAS technicians to run BAS Probe in the field and help shape what gets built next.

Email us View cutsheet

Prefer software on your laptop?

EcoTune Desktop Capture decodes an MS/TP trunk and explores devices from Chrome or Edge with a USB RS-485 adapter. No hardware to buy.

See Desktop Capture